'Steeda Aluminum Caster Camber plates for 90-'93 performance Mustang

STEEDA ALUMINUM CASTER CAMBER PLATES - DRAMATICALLY IMPROVE HANDLING, WITH LESS WEIGHT & MORE STRENGTH THAN STEEL!

Steeda's caster camber plates have always given you great adjustment range. Now they've added great style for your performance Mustang too, with a new machined billet aluminum top plate that looks as good as it performs. But good looks aren't the only thing these plates have going for them. The beefy 1/2 inch thick aluminum plates are and an incredible 3 times more resistant to bending than their standard steel plates, making them the perfect choice for coil-over equipped performance Mustangs that carry the entire front weight of the car through the caster camber plates.

Caster camber plates are essential for getting the most cornering performance out of your Mustang. The factory plates just don't have enough adjustment to give you a good performance alignment. Making matters worse, the factory upper strut mount bushing is soft and flexible. During hard corners the strut literally pushes the bushing out of shape, changing the alignment mid-corner. This can reduce your Mustangs cornering grip performance and increases tire wear.

Steeda's Caster camber plates replace the flexible upper strut mount with a premium race quality stainless steel performance spherical bearing. The spherical bearing allows the strut to pivot and turn freely without the slightest bit of play or deflection. No matter how hard you corner your Mustang, the caster camber plate doesn't flex and your performance alignment stays where you set it.

Steeda plates give you slots to adjust Caster and Camber. Factory plates only let you adjust camber, and even that has a very limited range. Steeda plates more-than-double the factory camber range, allowing a perfect performance alignment for everything from drag cars to road racers to "slammed" boulevard Mustangs. Caster adjustment slots let you increase caster, extra caster makes the Mustang track straighter and provides better on-center steering feel. Increased caster allows you to run slightly more negative camber than factory spec on the street without increasing tire wear, preserving tire life and improving performance handling. It also increases negative camber gain when the wheels are turned. In effect, your tires lean into the corner as you turn the wheel improving the contact patch for better cornering grip. Increased caster will also improve your Mustangs tire contact patch during braking for better stopping performance. Steeda Caster Camber Plates include recommended alignment settings for a variety of suspension setups and driving styles for your performance Mustang.

Product Benefits

* Increase caster for better high-speed stability and better performance steering response
* Correct camber for reduced tire wear and better cornering performance
* Adjustable strut mount height for more suspension travel on lowered Mustangs
* Adjustable strut mount can be set to stock height, which works better for drag racing than other plates which are too high and limit suspension extension at launch
* Specific plates for 79-89 and 90-93 Mustangs fit better than generic "one size fits all" offered by other aluminum plates
* Spherical bearing for better performance alignment and durability
* Teflon lined performance bearing never needs lubrication
* Lighter than competing steel plates
* Compatible with stock Mustang hoods and Steeda strut tower braces; not too tall like some plates
* Direct bolt-on. No drilling required.

Fits: 1990 Mustang, 1991 Mustang, 1992 Mustang, 1993 Mustang

'Steeda Aluminum Caster Camber plates for 90-'93 performance Mustang

STEEDA ALUMINUM CASTER CAMBER PLATES - DRAMATICALLY IMPROVE HANDLING, WITH LESS WEIGHT & MORE STRENGTH THAN STEEL!

Steeda's caster camber plates have always given you great adjustment range. Now they've added great style for your performance Mustang too, with a new machined billet aluminum top plate that looks as good as it performs. But good looks aren't the only thing these plates have going for them. The beefy 1/2 inch thick aluminum plates are and an incredible 3 times more resistant to bending than their standard steel plates, making them the perfect choice for coil-over equipped performance Mustangs that carry the entire front weight of the car through the caster camber plates.

Caster camber plates are essential for getting the most cornering performance out of your Mustang. The factory plates just don't have enough adjustment to give you a good performance alignment. Making matters worse, the factory upper strut mount bushing is soft and flexible. During hard corners the strut literally pushes the bushing out of shape, changing the alignment mid-corner. This can reduce your Mustangs cornering grip performance and increases tire wear.

Steeda's Caster camber plates replace the flexible upper strut mount with a premium race quality stainless steel performance spherical bearing. The spherical bearing allows the strut to pivot and turn freely without the slightest bit of play or deflection. No matter how hard you corner your Mustang, the caster camber plate doesn't flex and your performance alignment stays where you set it.

Steeda plates give you slots to adjust Caster and Camber. Factory plates only let you adjust camber, and even that has a very limited range. Steeda plates more-than-double the factory camber range, allowing a perfect performance alignment for everything from drag cars to road racers to "slammed" boulevard Mustangs. Caster adjustment slots let you increase caster, extra caster makes the Mustang track straighter and provides better on-center steering feel. Increased caster allows you to run slightly more negative camber than factory spec on the street without increasing tire wear, preserving tire life and improving performance handling. It also increases negative camber gain when the wheels are turned. In effect, your tires lean into the corner as you turn the wheel improving the contact patch for better cornering grip. Increased caster will also improve your Mustangs tire contact patch during braking for better stopping performance. Steeda Caster Camber Plates include recommended alignment settings for a variety of suspension setups and driving styles for your performance Mustang.

Product Benefits

* Increase caster for better high-speed stability and better performance steering response
* Correct camber for reduced tire wear and better cornering performance
* Adjustable strut mount height for more suspension travel on lowered Mustangs
* Adjustable strut mount can be set to stock height, which works better for drag racing than other plates which are too high and limit suspension extension at launch
* Specific plates for 79-89 and 90-93 Mustangs fit better than generic "one size fits all" offered by other aluminum plates
* Spherical bearing for better performance alignment and durability
* Teflon lined performance bearing never needs lubrication
* Lighter than competing steel plates
* Compatible with stock Mustang hoods and Steeda strut tower braces; not too tall like some plates
* Direct bolt-on. No drilling required.

Fits: 1990 Mustang, 1991 Mustang, 1992 Mustang, 1993 Mustang