N-51HR Camshaft 2600-6200 Range
N-51HR Camshaft works with stock OEM pistons with 1.6 roller rockers. Piston-to-valve clearance must be checked. RPM range 2600-6500.
Wildest and Best performer for 302 cu.in. 1.6 R.R. & 6500 rpm and 9:7 comp. Great with TFS Twisted Wedge, Edelbrock w/1.9 intake valve and AFR 165 heads. Must use Anderson Hi-Rev valve springs. Minimum 30lb injectors and 80mm mass air. Recommend 4:30 gears. Poor drivability under 2300 rpm, lumpy idle, rpm range 2600-6500, needs 2800-3400 converter. Must check piston to valve clearance.
Read Tech Article
Example of using N-51HR camshaft
Stock piston short block with the N-51hr camshaft, stg III Twisted Wedge heads w/ AFM HiRev springs, Holley Systemmax II intake, 70mm t.b.Velocity mass air &Power Pipe, PMS and Bassani 1 5/8-1 7/8 headers.
EXAMPLE of using N-51HR
Stock short block, Anderson N-51HR, PRW 1.6 R.R .PMS, TFS heads, TFS push rods, BX headers. X-pipe and muffler turn downs, 75mm Throttle body & EGR, FRPP pulley, Anderson Power Pipe, Mass air, Typhoone intake
N-51HR Camshaft works with stock OEM pistons with 1.6 roller rockers. Piston-to-valve clearance must be checked. RPM range 2600-6500.
Wildest and Best performer for 302 cu.in. 1.6 R.R. & 6500 rpm and 9:7 comp. Great with TFS Twisted Wedge, Edelbrock w/1.9 intake valve and AFR 165 heads. Must use Anderson Hi-Rev valve springs. Minimum 30lb injectors and 80mm mass air. Recommend 4:30 gears. Poor drivability under 2300 rpm, lumpy idle, rpm range 2600-6500, needs 2800-3400 converter. Must check piston to valve clearance.
Read Tech Article
Example of using N-51HR camshaft
Stock piston short block with the N-51hr camshaft, stg III Twisted Wedge heads w/ AFM HiRev springs, Holley Systemmax II intake, 70mm t.b.Velocity mass air &Power Pipe, PMS and Bassani 1 5/8-1 7/8 headers.
EXAMPLE of using N-51HR
Stock short block, Anderson N-51HR, PRW 1.6 R.R .PMS, TFS heads, TFS push rods, BX headers. X-pipe and muffler turn downs, 75mm Throttle body & EGR, FRPP pulley, Anderson Power Pipe, Mass air, Typhoone intake
Send Enquiry to sale@makemyecommerce.com or call us : +91 7890 222 444
Aeromotive Baffled Fuel Tank Sump
Aeromotive Baffled Fuel Tank Sump Take advantage of Aeromotive's leading edge engineering and design..
$10,797.00 Ex Tax: $10,797.00
Anderson F-82 Two Valve Camshafts 2800-7200 Range
Anderson F-82 Two valve Camshafts for PI Heads with AFM Valve Springs & aftermarket pistonsRPM r..
$37,740.00 Ex Tax: $37,740.00
BBK Throttle Body 70mm. Fits 05-09 Mustang 4.0L
BBK 70mm Throttle Bodies for 05-09 Mustang 4.0LAll BBK 2005-2009 Mustang throttle bodies are designe..
$19,799.40 Ex Tax: $19,799.40
Digital Gauge Kit MTX Series Wideband Air/Fuel Ratio
These Innovate MTX Series digital air/fuel ratio gauge kits are the only 100 percent digital wideba..
$11,940.00 Ex Tax: $11,940.00
Kooks Catted X-Pipe 3andquot; Metallic Stainless. Fits 07-10 GT500
Kooks Stainless 3" Metallic Catted X-Pipe for Kooks Full length Headers on 07-10 GT5003" stainless c..
$33,434.40 Ex Tax: $33,434.40
Nitrous Express Plate System. Fits 96-04 GT Mustang (50-300 hp)
Nitrous Express Plate system for 4.6L 2-ValveIs your 4.6 liter 2 valve motor a little light on torqu..
$41,999.40 Ex Tax: $41,999.40
Steeda Tri-Ax Short Throw Shifter. Fits 82-04 Mustang
Steeda Tri-Ax Short Throw Shifter For T5 & T45 1982-2004 Performance MustangSteeda re-invented the S..
$10,797.00 Ex Tax: $10,797.00
Turbonetics Turbocharger System. Fits 05-09 4.6L M/T
15168-1 Mustang Turbocharger system '2005 2009 4.6LV8Manual Transmission OnlyMajor Components •Tur..
$59,999.40 Ex Tax: $59,999.40