Anderson F-62 Two Valve Camshafts 2600-6500 Range
Anderson F-62 Two valve Camshafts for PI Heads with AFM Valve Springs & aftermarket pistons
RPM range 2600-6500
Forced Induction 8-13 lb. 4.6 Best performer up to 6600 rpm. Nice idle, good driveability down to 2000 rpm, performance range 2600-6500 rpm. Must have AFM performance valve spring kit. Works best with 80mm mass air, 70mm throttle body and TFS or Dragon Plenum. Headers and ported P.I. heads highly recommended.
Gears 3.73 to 4.10. With automatic transmission needs 3000-3300 converter.
Examples of using the F-62 Camshaft
RPM range 2600-6500
Forced Induction 8-13 lb. 4.6 Best performer up to 6600 rpm. Nice idle, good driveability down to 2000 rpm, performance range 2600-6500 rpm. Must have AFM performance valve spring kit. Works best with 80mm mass air, 70mm throttle body and TFS or Dragon Plenum. Headers and ported P.I. heads highly recommended.
Gears 3.73 to 4.10. With automatic transmission needs 3000-3300 converter.
Examples of using the F-62 Camshaft
RPM range 2600-6500
Forced Induction 8-13 lb. 4.6 Best performer up to 6600 rpm. Nice idle, good driveability down to 2000 rpm, performance range 2600-6500 rpm. Must have AFM performance valve spring kit. Works best with 80mm mass air, 70mm throttle body and TFS or Dragon Plenum. Headers and ported P.I. heads highly recommended.
Gears 3.73 to 4.10. With automatic transmission needs 3000-3300 converter.
Examples of using the F-62 Camshaft
Used with Kenny Bell 2.6 with 17lb of boost
This a DSS 5.0 with TFS heads, F-62 camshafts, Predator, 60lb/hr injectors,
Anderson Power Pipe with Abaco DBX-97b On 93 octane fuel
RPM range 2600-6500
Forced Induction 8-13 lb. 4.6 Best performer up to 6600 rpm. Nice idle, good driveability down to 2000 rpm, performance range 2600-6500 rpm. Must have AFM performance valve spring kit. Works best with 80mm mass air, 70mm throttle body and TFS or Dragon Plenum. Headers and ported P.I. heads highly recommended.
Gears 3.73 to 4.10. With automatic transmission needs 3000-3300 converter.
Examples of using the F-62 Camshaft
Used with Kenny Bell 2.6 with 17lb of boost
This a DSS 5.0 with TFS heads, F-62 camshafts, Predator, 60lb/hr injectors,
Anderson Power Pipe with Abaco DBX-97b On 93 octane fuel
Send Enquiry to sale@makemyecommerce.com or call us : +91 7890 222 444