Anderson / EFI Hurricane Intake Manifold Kit, up to 7000 rpm for 351W blocks

The Anderson/ EFI Hurricane  is a Great looking intake manifold that lightens up the look of your engine compartment and pulls very strong on the top RPMs This intake has the capability to pull as high as 7500 rpms.
Anderson/ EFI Hurricane is Great for natural aspirated 351/408 c.i. Hi-RPM engines.  It is also a good choice for forced Induction 351/408 c.i. engines looking for that upper RPM boost of power.

(shown in picture but not included in PKAF-70213A are throttle body,IAC motor, fuel injectors, ACT sensor, water outlet and w/ECT sensor)

KITAF-70213W  includes:                           
PP-70213 The EFI-Hurricane manifold is designed for racing or serious street applications using aftermarket cylinder heads. Includes bosses that can be drilled and tapped for nitrous.
It features a rear water crossover passage along with four corner tapped water ports. Ports are 1.90" x 1.08" at the gasket flange and the manifold contains enough material to open ports to 2.10" x 1.25". Use Professional Products intake gasket #54600 or Fel-Pro intake gasket #1250 or #1262. This manifold includes a 1/8-NPT vacuum port under the carb flange, a feature lacking in competitive manifolds of this type.  
PP-10607 fuel rail kit includes an adjustable fuel pressure regulator, a stainless braided -6 AN fuel crossover hose, stainless steel mounting brackets and hardware,
PP-70213 EFI Snorkel Inlets,
AF -70213A Snorkel adapter for 5.0 throttle body, 
AF-kit fuel hardware kit to fit up to stock 87-93 fuel rails.

The Anderson/EFI-Hurricane kit includes everything you need to fit up to 5.0 throttle body and 87-93 stock fuel lines. (not supplied but will need 35 inches of 5/8 heater hose and 29 inches of 3/4 heater hose)
Supplemental Instructions

Anderson / EFI Hurricane Intake Manifold Kit, up to 7000 rpm for 351W blocks

The Anderson/ EFI Hurricane  is a Great looking intake manifold that lightens up the look of your engine compartment and pulls very strong on the top RPMs This intake has the capability to pull as high as 7500 rpms.
Anderson/ EFI Hurricane is Great for natural aspirated 351/408 c.i. Hi-RPM engines.  It is also a good choice for forced Induction 351/408 c.i. engines looking for that upper RPM boost of power.

(shown in picture but not included in PKAF-70213A are throttle body,IAC motor, fuel injectors, ACT sensor, water outlet and w/ECT sensor)

KITAF-70213W  includes:                           
PP-70213 The EFI-Hurricane manifold is designed for racing or serious street applications using aftermarket cylinder heads. Includes bosses that can be drilled and tapped for nitrous.
It features a rear water crossover passage along with four corner tapped water ports. Ports are 1.90" x 1.08" at the gasket flange and the manifold contains enough material to open ports to 2.10" x 1.25". Use Professional Products intake gasket #54600 or Fel-Pro intake gasket #1250 or #1262. This manifold includes a 1/8-NPT vacuum port under the carb flange, a feature lacking in competitive manifolds of this type.  
PP-10607 fuel rail kit includes an adjustable fuel pressure regulator, a stainless braided -6 AN fuel crossover hose, stainless steel mounting brackets and hardware,
PP-70213 EFI Snorkel Inlets,
AF -70213A Snorkel adapter for 5.0 throttle body, 
AF-kit fuel hardware kit to fit up to stock 87-93 fuel rails.

The Anderson/EFI-Hurricane kit includes everything you need to fit up to 5.0 throttle body and 87-93 stock fuel lines. (not supplied but will need 35 inches of 5/8 heater hose and 29 inches of 3/4 heater hose)
Supplemental Instructions